Albalá Ingenieros DEM3000C01, Manual

Page: 20 / 30

Albalá Ingenieros | Manual DEM3000C01
The following functions of the DEM3000C01 can be performed remotely:
- Selection of the audio group to be embedded.
- Selection of the operating mode, bit depth of the audio, number of channels per field
and erasure before embedding.
- Selection of the alarm conditions that will be displayed via the indicator LEDs on the
front panel.
- Supervision of the status of the audio and video being received.
4.3.1. Details of the DEM3000C01 registers
The DEM3000C01 module provides control and status registers that can be read and
written by means of specific commands described in the communication control
module user manuals.
The parameter information grouped in the CONTROL or RAM sections is stored in
volatile memory. Any modifications to the parameters will be lost when the module
power supply is disconnected unless the "EEPROM Save" button within the software
has been pressed.
The STATUS section parameters are read-only and cannot be modified.
The parameters that can be controlled and supervised remotely for each version of
the firmware are listed below:
VERSION 1.X
CONTROL
Name add ext msk snmp trap Description
EMBED_INS_A 0x00 0x01 Y N Allows selecting if the audio is embedded (Section A)
0=No, 1=Yes
EMBED_MODE_A 0x00 0x02 Y N Allows selecting if the incoming audio groups are deleted before embedding
(Section A)
0=Clear+Insert, 1=Append
EMBED_CH_A 0x00 0x04 Y N Allows selecting the number of AES frames embedded in the group (Section A)
0=2, 1=4
EMBED_INS_B 0x00 0x08 Y N Allows selecting if the audio is embedded (Section B)
0=No, 1=Yes
EMBED_MODE_B 0x00 0x10 Y N Allows selecting if the incoming audio groups are deleted before embedding
(Section B)
0=Clear+Insert, 1=Append
EMBED_CH_B 0x00 0x20 Y N Allows selecting the number of AES frames embedded in the group (Section B)
0=2, 1=4
EMBED_BITS 0x00 0x40 Y N Allows selecting the number of bits of the embedded audio
0=24, 1=20
OPERATING_MODE 0x00 0x80 Y N Allows selecting if the module acts as two one group embedders or as one two
groups embedder
0=1 SDI x 2 groups, 1=2 SDI x 1 group
GROUP_A 0x01 0x03 Y Y Allows selecting the group in which the audio is embedded (Section A)
0=1, 1=2, 2=3, 3=4
GROUP_B 0x01 0x30 Y Y Allows selecting the group in which the audio is embedded (Section B)
0=1, 1=2, 2=3, 3=4
NO_AES1_A_MASK 0x02 0x01 N N Allows masking AES1 signal fail (Section A)
0=Disabled, 1=Enabled
20