Alarko ALG 120/M, Installation Operation & Maintenance

Page: 6 / 57

The assembly and the commissioning must be done by an officially authorized Alarko-Carrier dealer
or service.Do not make any operations on any part of this burner for any purpose such as starting,
adjusting and servicing, other than operations which are stated in this manual.
Please take into account the warning labels such as “Fragile” and “Upright Position” while
handling.
The best carrying position of the burner is handling by the burner body and combustion head.
•Necessary information about the Gas appliances and Boiler Rooms can be gathered from
authorized ALARKO-Carrier dealers.
•The operation and commissioning rules are of importance. Please take these cautions into account
during daily operations, after long-term non operating times and error determinations.
•The yearly maintenance and seasonal start-ups of your burner must be done by Alarko-Carrier
service people.
•Do not keep flammable substances in any for (gas / liquid / solid) close to your burner.
6
PRECAUTIONS
GENERAL INFORMATION
Alarko ALG gas burners of modulating kinds are designed for the combustion of natural gas and
LPG and are equipped with appropriate safety equipment requested by the international standards.
The burner category is II 2R/3R and they operate in a capacity range of 844 – 1861kW(ALG200/M),
512-1180kW(ALG120/M) and 553-1200kW (ALG120/M LPG).
Alarko ALG 200/M, ALG 120/M gas burners;
•
Are designed for the combustion of natural gas,
•
Are equipped with appropriate safety equipment required by international regulations,
•
Have auto start-up
•
Are comparably silent burners.
ALG 200/M (LPG), ALG 120/M (LPG) gas burners;
•
Are designed for the combustion of LPG,
•
Are equipped with appropriate safety equipment required by international regulations,
•
Have auto start-up
•
Are comparably silent burners.