Alaris S2050, User Manual

Page: 19 / 76

A-61870 July 2017
11
2 Installation
- Receive a message on the display screen that EasySetup
configuration was successful.
- Proceed with “Install the scanner driver”.
Advanced
1. For Advanced setup, you first choose:
- Wireless Network
- Wireless Directly
- Wired Network
- Web Setup
2. During Advanced setup you will need to:
- Configure your access point
- Specify the WPA2 password
- Select the access point subnet
- Enter SSID
- Select country
- Select channel
- Select bandwidth
- Select security
3. When you have completed the above, proceed with “Install the
scanner driver”.
NOTE: If you later want to reconfigure your scanner network or power
choices, choose Settings from the menu on the scanner
display.
Install the scanner driver
1. When instructed by the installer, get the driver software:
- If the PC has access to the internet, go to

www.kodakalaris.com/go/installS2000w
and download the latest
driver software.
- If the PC does not have internet access, put the CD from the
scanner box into the CD drive of your PC.
2. Run the “Alaris S2000 Scanners” driver installation, following its
steps.
Install ferrite core (for Ethernet only)
1. If you are using an Ethernet cable in your S2000w setup, open the
ferrite core that came with the scanner.