Assembly Section 3-4
SRW1400 10/04
© 2004
Alamo Group Inc.
ASSEMBLY
ASSEMBL
Y
Wheel Lock Pins
The transport wheel lock pin comes equipped with two holes for the snapper pin. Refer to Figure 3-4.When the
rock windrower is in transport position, the transport wheel lock pin should be secured in the transport position.
The wheel lock pins come equipped with two holes for the hairpin. Refer to Figure 3-5. When the rock windrower
is pivoting between transport and working positions, the wheel lock pins should be secured in the up position as
indicated.
When the rock windrower is in working or transport positions, the wheel lock pins should be secured in the down
position as indicated.
Figure 3-4
Figure 3-5
Driveline Shield Chains
Attach PTO shield chain to tractor or windrower hitch allowing sufficient slack for turning.
IMPORTANT
: OSHA, ASAE, and SAE standards require that all rotating shafts be guarded against contact. The
unchained plastic shields can rotate with the driveline but must stop when they contact another object, (Note:
these shields may also be chained.)
The shields
must
be regularly greased and checked that they rotate freely on the driveline. Refer
to the Lubrication section for greasing intervals.
Summary of Contents for Schulte SRW 1400
