Alamarin Jet IO, Operation And Maintenance Manual

Page: 36 / 48

Maintenance
Operation and maintenance manual IO
32 IO/000/EN/1.3.0
Figure 20. Replacing the oil filter
2. Pull out the oil filter (figure 20, point A) and the spring keeping it in place
(figure 20, point B) and replace the filter.
It is not necessary to replace the spring unless it is damaged.
3. Put the cover back into place. Make sure that the cover seal is correctly
positioned in the groove (figure 20, point C).
Position the cover carefully so that the spring is correctly positioned in
relation to the support (figure 21).
4. Reattach the cover screws (6 pcs).