Alamarin Jet IO, Operation And Maintenance Manual

Page: 5 / 48

Introduction
Operation and maintenance manual IO
IO/000/EN/1.3.0 1
1. Introduction
Congratulations on purchasing a new Alamarin-Jet IO control system! This
manual contains important information on the operation, use and maintenance
of the unit. Please read these instructions carefully before using the unit. This
way the unit will be safe to operate.
Please retain this manual for the duration of the product's life cycle. If you lose
the manual, contact your nearest distributor for a new one. If you sell the unit,
make sure you hand over this manual to the new owner.
Please contact your nearest distributor if you have any queries regarding the
operation or maintenance of the unit.
© Alamarin-Jet Oy
Tuomisentie 16
FI-62300 Härmä, Finland
Telephone: +358 10 7745 260
Fax: +358 10 7745 269
Internet: www.alamarinjet.com
All rights reserved.
The information in this manual may not be copied, published or reproduced in
any way whatsoever, or exploited for commercial purposes, without express
written permission from Alamarin-Jet Oy.
The information in this manual is subject to change without notice. Alamarin-
Jet Oy reserves the right to modify the contents without notice.
1.1. Safety precautions
Read these instructions carefully before you operate a boat equipped with the
water jet propulsion unit or carry out any maintenance procedures. Please
also read the boat's manual. Always follow the instructions and the safety
precautions below.
• The maintenance procedures described in this manual may only be carried
out by a person who has read this manual
• Any components must be replaced with either components supplied by
Alamarin-Jet Oy or otherwise approved by Alamarin-Jet Oy
• The tools that are to be used must be clean and appropriate for the intended
purpose.
• The power supply must always be switched off at the main power switch
before carrying out maintenance procedures.
1.2. Symbols
Please refer to table 1 for a description of the symbols used in this manual.
Table 1. The symbols used in the manual
Icon Description
DANGER
Negligence in the performance of the procedure can endanger
your life.