Alamarin Jet IO, Operation And Maintenance Manual

Page: 40 / 48

Problem situations
Operation and maintenance manual IO
36 IO/000/EN/1.3.0
Figure 25. Backup control activation button
• The system connectors are properly connected.
The system switches on, but control is unresponsive or does not
function properly
Check cables and connectors. Power off the system, wait for one minute
and switch the system on again. Also check that the jets’ impeller shafts are
rotating the hydraulic pumps, that the oil level in the oil reservoir is adequate
and that there are no leaks in the hydraulic system.
Engine RPM does not increase
Attempt to restart the system. Check connectors to the engines. If the system
includes more than one control station, make sure that the correct control
station is active. Make sure that the backup control station is not active.
Gears do not engage
Check the position of the accelerator. Check connectors to the gears.
The jet is clogged
Press the gear switch on the OP1 control panel temporarily to the backflush
position.