3.2.2 Audio Setup
This is guide for setting audio output of MG-35. You can use Stereo or Digital 5.1 ch..
9
Analogue/DCPM: Select when you connect the supplied audio cables (Red / White) to TV or Audio set directly.
9
Encoded Digital: Select when you want to listen through 5.1Ch / DTS Dolby by connecting receiver (or amplifier) with Optical or
Coaxial cable.
<Setup Procedure>
①
Turn on MG-35 and press [SETUP] in Mode
Selection screen.
②
Move to ‘Audio’ icon and press [ENTER].
Setup box will be displayed under icon menu.
③
Move to Audio Output Mode that you want
and press [ENTER].
④ F
inally, press [SETUP] again for saving
configurations.
32
Summary of Contents for MediaGate MG-35
Page 1: ......
