1.2 Format Built-in HDD via USB
1.2 Format Built-in HDD via USB
If the built-in HDD is not formatted, PC can not detect the hard disk drive. If so, format the hard disk first referring to the
If the built-in HDD is not formatted, PC can not detect the hard disk drive. If so, format the hard disk first referring to the
following guide. * If the hard disk drive is al
ready formatted, see “1.3 Copy Data via USB”.
1.2.1 Windows 98SE, ME
1) Install Windows 98 Driver. Find the driver at
Windows 98 CD
→
MediaGate MG-35
→
English
→
Windows 98 Driver Directory. After finishing
installation, Connect MG-35 to PC via USB cable,
and plug power cable of MG-35.
2) Select [Start
→
Program
→
Accessories
→
MS-
DOS Prompt] on Windows.
5) Select “5. Chang current fixed disk drive” and
press [Enter].
6) Type the last Disk number in 0% usage.
7) Select “1. Create DOS partition or Logical DOS
Drive” and press [Enter].
3) Type “fdisk” command at Command Prompt
window and press [Enter].
4) Type the “Y” at the “Do you wish to enable large
disk support (Y/N)” and press [Enter].
8
Summary of Contents for MediaGate MG-35
Page 1: ......
