6) Set the network configurations of MG-35.
Press [SETUP] of remote control for moving to setup
screen. On that screen, select ‘DHCP Off’ and write IP
address & Subnet mask.
For example,
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
After writing, press [SETUP] again for saving
configurations.
<MG-35’s IP Address>
9
If you have already been provided dynamic IP address
from DHCP Server or IP Router on your local area
network, you don’t need to write static IP address
absolutely. Use ‘DHCP on’ or write IP address & Subnet
mask that DHCP Server or IP Router provide.
9
Check ‘IP address obtained automatically’
When you use ‘DHCP On’, you can see the IP address in
MENU screen after selecting ‘PC-Network’ icon in Mode
Selection screen.
9
If you have already been
‘obtained an IP address
automatically’
from DHCP Server or IP Router on your
local area network, you don’t need to write specific IP
address absolutely. Use ‘Obtain an IP address
automatically’ or write IP address & Subnet mask that
DHCP Server or IP Router provide.
9
You have to connect MG-35 to TV set for this setup.
See “3.1.1 Connect Video Cable”.
20
Summary of Contents for MediaGate MG-35
Page 1: ......
