Subject to changes in line with technical progress!
27
3426558
Commissioning
6.2
Switching the device on and off
6.2.1 Overview
NOTE
The illustration of the hygiene timer is purely an example. The hygiene timer on your device
may differ slightly from that illustrated here.
7
5
6
9
8
1
2
3
4
1
Device plug
6
Fan rotary switch (
O
/
I
)
2
Main switch
7
Hygiene timer
3
Control panel
8
Pre-filter age indicator
4
Fan control knob (
Mid
/
High
/
Power
)
9
Activation panel
5
Run
LED (green)
6.2.2 Switching on the device
Step
Action
1
Switch on the device at the device main switch (2) on the device plug (1). The device is connected to the mains power
supply.
2
Turn the fan rotary switch (6) to position
I
. The fan goes into operation.
Pay attention to the green
Run
LED (5) on the control panel (3); it must come on. The device is ready for operation.
3
Set the air flow rate to the air filtration rate specified for this room at the fan control knob (4) with the steps
Mid
,
High
and
Power
. Follow the recommendations in section “3.2.2 Air filtration data" on page 16.
6.2.3 Switching off the device
Step
Action
1
Turn the fan rotary switch (6) on the control panel (3) to position
O
. The device comes to a standstill.
2
Switch off the device at the device main switch (2) on the device plug (1). The mains power supply is interrupted.
3
Pay attention to the green
Run
LED (5) on the control panel (3); it must not be lit. The fan is switched off.
4
Disconnect the mains plug if maintenance work is to be carried out or if the device is not going to be in operation for a
prolonged period.
