Translation of the original operating manual
24
AL-KO
AIR
SAFE
®
1200 / 1600
5.3
Set up the device and secure it
CAUTION
Risk of hand injuries due to pinching or crushing during adjustment of the correct height
at the device feet.
Risk of pinching or crushing of the hands when adjusting the device feet.
Use suitable tools for the adjustment work.
Wear your PPE (protective gloves, safety shoes).
ATTENTION
When choosing the setup location for the air purifier, avoid exposing the hygiene timer to
direct sunlight.
ATTENTION
Ensure that the air purifier cannot tip over during the following work. Have a second person
to help you.
ATTENTION
Suitable screws and dowels for the wall mounting bracket must be supplied by the customer.
Use only approved fastening materials suitable for the wall mounting.
The
AL-KO
AIR
SAFE
®
1200 / 1600
air purifier is bolted to a wall at the installation location using a wall mounting bracket
to ensure stability. Proceed as follows:
Step
Action
1
Ensure that both filters are installed in the air purifier.
2
Ensure that the rear housing cover and the cover with the control panel are closed and screwed tight.
3
Ensure that the air purifier is standing on a level surface with sufficient load-bearing capacity.
4
Ensure that the domestic power socket is within reasonable reach of the setup location.
5
Push the air purifier with its rear side against the wall on the castors under the device base. Use the handle recess on
the rear side of the device for positioning.
6
Observe the minimum clearances of 0.25 m to the sides and above the device.
7
Ensure that the air purifier is set up on level ground. Correct the alignment of the device using the height-adjustable feet
on the device base.
8
Fasten the air purifier to the wall using the wall mounting bracket so that it is secured to prevent tipping or rolling away.
9
Ensure that the air can be drawn in unhindered through the intake grille on the front side of the device, that the intake
grille is not obstructed by objects and that the air purifier is not in the vicinity of contamination source (kitchen extrac
-
tor hood, central dust extraction system, etc.).
10
Ensure that the purified air can be discharged unhindered through the outlet hood on the upper device cover. Do not
place anything on the cover.
11
Ensure that the air purifier does not obstruct any access or escape routes.
