AL-KO AIRSAFE 1200, Operating Manual

Page: 21 / 44

Subject to changes in line with technical progress!
21 3426558
Delivery, transport, storage
4
A
1
A B
3
2
5
A Transport on one-way pallet 3 Forks
B Transport on hand truck 4 Air purifier
1 Lashing strap 5 Hand truck
2 One-way pallet
Use a forklift or pallet truck to transport the air purifier on its one-way pallet (A).
Use a hand truck to transport the air purifier to its intended installation location (B).
„
Position the forks (3) of the forklift or pallet truck in the middle of the one-way pallet (2). Pay attention to a uniform
distribution of the weight.
„
Lift the one-way pallet from the loading area of the transport vehicle and place it on level ground.
„
Loosen and remove the two lashing straps (1).
„
Lift the air purifier (4) off the one-way pallet.
„
Use a hand truck (5) for the further transport of the device to its setup location.
NOTE
To protect the surface of the device during transport, we recommend that the outer packaging
(plastic foil) is left on the device and removed only at the final setup location.
4.3 Storage prior to installation
If the air purifier has been delivered, but cannot be installed immediately in its intended installation location, observe the
following:
„
Store the air purifier in its original packaging or protect the device from dust using a flexible cover during prolonged
storage.
„
Store the air purifier in a dry location where it is protected from the weather.
„
Do not store the air purifier outdoors.
„
Frequent and, above all, abrupt temperature changes must be avoided during storage. This entails a risk of moisture
condensing. Mould could develop as a result.
„
In order to avoid bearing damage, the fan impeller must be turned once a month during standstill times of more than
one month. To do this, switch on the device briefly at the device main switch and then switch off again.