11
Press and hold the program key (
) for three seconds, then select
Prog06
.
A number appears on each prayer display and the number on AL-Fajr display
will be flashing; this number indicates the alarming sound before Azan, see
table3
.
Use the control keys to set the required sound for AL-Fajr prayer then press
(
) key, the number on AL-Duhr display starts flashing.
Repeat the last step to set the alarming sound before Azan for the other prayers.
As you have finished; press (
) to save changes, the program number starts
flashing (
06
on the month digits), press (
) once again to exit from the
programming mode.
12.
Sounds activating and deactivating ( ):
(Azan, Iqama Takbirat, alarm before Azan, key tones).
Enter the programming mode and select
Prog07
.
On AL-Fajr display appears:
If Azan sound is enabled or
if Azan sound is disabled
(
ON/OFF
is flashing), use the increase/decrease keys to set the required value then
press (
) key, the sunrise display starts flashing.
On the sunrise display appears:
If Iqama Takbirat sound is enabled or
if Iqama Takbirat sound
is disabled (
ON/OFF
is flashing), use the increase/decrease keys to set the required
value then press (
) key, AL-Duhr display starts flashing.
On AL-Duhr display appears:
If the alarm sound before Azan is enabled or
if the alarm sound
before Azan is disabled (
ON/OFF
is flashing), use the increase/decrease keys to set
the required value then press (
) key, AL-Asr display starts flashing.
On AL-Asr display appears:
If the key tones are enabled or
if the key tones are disabled
(
ON/OFF
is flashing), use the increase/decrease keys to set the required value then
press (
) key, AL-Fajr display starts flashing.
As you have finished; press (
) to save changes, the program number starts
flashing (
Prog07
on the month digits), press (
) once again to exit from the
programming mode.
For instance
: the nearby figure illustrates that Azan
is enabled but Iqama Takbirat, alarm before Azan,
and key tones are disabled.
