6
6.
Locking the remote control keys:
AL-Muzakkira is provided with a remote control lock to avoid abuse, when you press any
key on the remote control and the symbol
appears on the temperature
display; this means that the remote control is locked and AL-Muzakkira will not respond.
o
To unlock the remote control, press and hold (
)
key for three seconds.
o
To lock the remote control press (
) key.
7.
Sleep mode and switching AL-Muzakkira on/off:
In the sleep mode; AL-Muzakkira
displays the time and temperature only.
When you press the (
) key on the remote control or the (
) key on the local keypad
repeatedly, AL-Muzakkira circulates from the normal operation mode to the sleep mode
to the power off mode then returns back to the normal operation mode and so on.
Notes
:
o
When AL-Muzakkira is off, the light indicator of the infrared receiver flashes every
three seconds to indicate that the main power is connected; and AL-Muzakkira is
ready to receive the power-up command from the remote control.
o
When it's the time for Azan and AL-Muzakkira is in the sleep mode, it will switch to
the normal operation mode for only one minute and then it will go back to the sleep
mode automatically.
o
When AL-Muzakkira is in the sleep mode, you can return to the normal operation
mode by pressing any key except (
) key or (
) key.
8.
Adjusting the time and date:
8.1
How to Set the time and date:
1.
Press and hold the adjustment key (
) for three seconds to enter the time and
date adjusting program.
2.
The Georgian date appears and the year digits start flashing. Set the required
value then press (
), the month digits will start flashing.
3.
Set the month and the day in the same way.
4.
The Georgian date will disappear and AL-Muzakkira will calculate the equivalent
Hijri date which appears flashing (
the whole date digits will flash
) on the date
display.
5.
If there is mismatch between the calculated Hijri date and the actual one, use the
increase (
) and decrease (
) keys to set the actual value, then press (
).
6.
The hour digits will start flashing, set the required value then press (
), pay
attention to the AM/PM led indicators and to the letter that appears in the
seconds' place:
o
Letter
indicates
A
M
.
o
Letter
indicates
P
M
.