background image

 AK-CI-01 - user manual 

p. 3

Problem

Cause

Solution

The car power inverter 
or device connected to it 
does not work

No voltage

ź

properly connected to the 
cigarette lighter socket

ź

Check the cigarette lighter 
fuses

Check if power inverter is 

The inverter is 
overloaded

ź

Disconnect the power inverter 
from powered device, check the 
correctness of the current 
parameters

Problem with the plug

ź

properly connected to the 
cigarette lighter socket

Check if power inverter is 

Undervoltage on the 
battery

ź

Charge the battery or replace it 
with a new one

There is a suspicion of a 
product defect

ź

Stop using and contact the 
seller

The inverter has turned 
off

The battery has to low 
current

ź

Charge the battery or replace it 
with a new one

The inverter is 
overloaded

ź

Disconnect the power inverter 
from powered device, check the 
correctness of the current 
parameters

The power inverter is 
overheated

ź

Disconnect the power inverter 
from the cigarette lighter socket 
and wait until it cools down

There are video noise or 
radio frequency 
interference

Electromagnetic 
interference occur.

ź

from interferenced receiver

ź

Check the correctness of 
antenna’s operation (in the case 
of TV)

ź

Use shielded cables

Place the power inverter away 

Removing the most common problems

car power inverter

Summary of Contents for AK-CI-01






Reviews: