AK-CI-01 - user manual
p. 2
Safety Precautions
WARNING! Product heats up during operation. To reduce the risk of burns or overheating the car power
inverter, do not place it in restricted ventilation area. Also, do not allow the working car power inverter to
touch soft surface such as pillows, blankets or clothing. The power supply meets the limits on the
surface temperatures available to the user, as defined in the International Standard for Safety of
Information Technology Equipment (IEC 60950).
Connecting devices whose demanded power is greather than power of the car power inverter, can
cause power failure or even damage (burn) of car power inverter.
An electrostatic discharge occurs when two object touch each other, for example, an electric
charge that occurs when user touch metal door handle after walking on a carpet . Discharging
electrostatic charges from fingers or other electrostatic conductors can damage electronic
components. To avoid damaging the powered devices, abstain from touching electrical outlets,
wires and electonic circuits. The user’s contact with electronic components should be kept to a
minimum.
The II protection class device. It provides protection against electric shock against direct and
indirect contact, and thanks to the additional isolation it is not necessary to connect the device
case with the protective earth conductor.
The manufacturer of the product is not responsible for damage or insults caused in effect
of disobey the safety instructions and informations contained in these user manual.
ź
Keep the product and the packaging out of range of children and animals. The package
includes a foil that child could choke while playing.
ź
It is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or
crushing may cause its damage.
ź
The product operation in adverse conditions is not allowed. Adverse conditions are primarily:
exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high
humidity, surrounds of gases, dusts or flammable and aggressive liquids.
ź
If the product has been damaged, does not work properly or has been stored for a long period
of time in bad or unfavorable conditions, safe operation of the device is not possible. It is
essential to stop using the product and to protect it against re-use for security purposes.
ź
Product and power cord should not be touched with moist or wet hands under no
circumstances.
ź
Short-circuiting the current connection is prohibited.
ź
Product must be connected in compliance with the polarity.
ź
Make sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges or
mechanically loaded in any other way. Avoid thermal load of the cable - in particular keep away
from heat sources (such as stoves, radiators, fireplaces).
ź
Power cords should be laid in such a way as to eliminate the risk of stumbling or hooking over.
ź
It is forbidden to modify the power cord. In the case of modifications, the cable may be
damaged, causing threats to life, health and property.
ź
The car power inverter can be connected only with 12 V battery. It can not be powered by 6 and
12 V battery.
ź
Power source must be able to supply enough power for inverter. Divide the power consumption
of the powered device (in Watts) by 10 to determine the demand for the power. For example: for
150 W car power inverter the power source need to deliver 15 A.
car power inverter
230 V voltage can be very dangerous for user. Improper use of the device may result in an electric shock
and lead to
threats to life, health and property
.
