![background image](http://html1.mh-extra.com/html/akura/mb18-idtv/mb18-idtv_manual_2887192006.webp)
- 6 -
Before Switching On Your TV
Power Connection
AC adapter
To POWER
INPUT DC 12 V
terminal
IMPORTANT:
The TV set is designed to op-
erate on 12V DC. For this, an adaptor is
used which gives 12V DC voltage. Connect
this adaptor to a system that supplies 230-
240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the
ambient room temperature before you con-
nect the set to the mains.
Connections To The RF Input
Socket
VHF/UHF
75
REAR OF THE TV
CABLE TV
Connect the aerial or cable connection to the
RF input socket at the back of the Tv. You
may also connect RF outputs from a VCR to
this socket.
How To Connect Other Devices
IMPORTANT:
Switch off the TV before con-
necting any external device.
Sockets for external connections are at the
rear side of the TV. For connection of other
devices via Euroconnector refer to the manu-
als of the related devices.
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1-
Connect the power supply cord to the sys-
tem. Press On/Off switch at the rear of the
TV. Then the TV switches itself to stand-
by mode and the LED becomes
RED
lo-
cated on the front of the TV.
2-
To switch on the TV from stand-by mode
either:
Press a digit button on the remote control so
that a programme number is selected,
or,
Press “
”, "
-P/CH
" or "
P/CH+
" button on the
top of the TV or press “-P/CH”
or
“P/CH+”
button on the remote control, so that last
switched off programme is selected.
By either ways the TV will switch on and the
LED will turn off.
To switch the TV off:
• Press the “stand-by” button on the remote
control, so the TV will switch to stand-by
mode and the LED will become
RED
,
or,
Press the “
” button located on the top of
the TV, so the TV will switch off and the LED
will become RED.
To power down the TV completely, press
On/Off switch,
or
unplug the power cord from the mains
socket.
Initial Settings
When the TV is turned on for the first time, it
is in the digital mode.
Because this is the first time the TV is used, there
are no channels stored in the memory and the
following message appears on the screen.
Please ensure aerial is plugged in. Do you
want to start first time installation?
Yes
No
ENG-20700-20 INCH TFT-BACK AV-1549UK-MB18 IDTV-(WO PIP-WO PC)-50093041.p65
06.09.2006, 17:37
6
Summary of Contents for MB18 IDTV
Page 34: ......