- 26 -
Fastext
Your TV supports the Fastext Teletext system.
When the page number of any of the pages in
memory is entered, the system will not search
for the requested page; instead it will display
the page automatically.
• Press the “
P/CH+
” button to move the Tele-
text screen forward one page at a time.
• Press the “
-P/CH
” button to move the Teletext
screen backward one page at a time.
For Fastext
The subject-heading for the information may
have a particular color.
• Press an appropriate RED
,
GREEN
,
YELLOW
or
BLUE
button in order to reach the relevant
page quickly.
For TOP text
This is applicable only if your TV is equipped
with TOP text feature. (optional)
TOP text mode of operation will be activated
automatically according to the transmission.
• If TOP text transmission is present, colour
coded buttons will appear in status row.
• If TOP text transmission is not present, sta-
tus row will not appear.
The subject-heading for information may be
located in coloured box.
In TOP mode the “
P/CH +
” or “
- P/CH
” com-
mands will request the next or previous
page respectively. If TOP text transmission
is not available, in case of operation of these
commands, wraparound occurs. For ex-
ample page 100 appears to be one greater
than page 199.
Connect Peripheral
Equipment
There is a wide range of audio and video
equipment that can be connected to your TV.
The following connection diagrams show you
where the different (Optional) equipment
should be connected at the rear side of the TV.
Via The Euroconnector
Your TV has one Euroconnector socket. If
you want to connect peripherals (e.g. video,
decoder, etc.) which have Euroconnectors to
the TV, use SCART input.
If an external device is connected via the
Euroconnector socket, the TV will be
switched to AV mode automatically. If the ex-
ternal device is connected to SCART input
and the signal is RGB1, select RGB1 by
pressing the “
AV
” button.
Via Ant Input
If you want to connect to your TV, peripherals
like video recorders or decoders, but the de-
vice you want to connect does not have
Euroconnector, you should connect it to the
ANT input of the TV.
If the VCR is connected via antenna input
it is suggested to use Programme 0.
Decoder
Cable TV offers you a wide choice of
programme. Most of them are free, others
are to be paid for by the viewer. This means
that you will need to subscribe to the broad-
casting organisation whose programmes
you wish to receive. This organisation will
supply you a corresponding decoder unit to
allow the programmes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
• Connect the aerial cable.
ENG-20700-20 INCH TFT-BACK AV-1549UK-MB18 IDTV-(WO PIP-WO PC)-50093041.p65
06.09.2006, 17:37
26
Summary of Contents for MB18 IDTV
Page 34: ......
