![background image](http://html1.mh-extra.com/html/akura/atw-ga2929/atw-ga2929_instruction-manual_2887185009.webp)
Trouble Shooting Guide
If you are experiencing trouble, please refer to the table next before calling the
Customer Help desk.
Testing the system before Final installation
.
It is wise to set up the system in the same room before installing the receiver in
another location.
This ensures that the system is working before you install in another room.
The TV signal is
carried
on a Super UHF carrier (2.4 Ghz) This signal may not
penetrate solid brick walls.
2
.3 Remote Control ( Changes the channel of your signal source)
1. Plug the receiver in the TV, and adjust the receiver by rotating orientations
until you get the best reception.
2. Position the IR mouse so that your remote control signal can strike the
front of the IR mouse. See Fig.8.
3. To use your remote control, point it at the front of the IR mouse and
operate it as you normally would.
7
Summary of Contents for ATW-GA2929
Page 2: ......
Page 12: ...Aug 2007 408 000444 00...