5750H002 Ed.03
4
3.- Equipment description
Bluetooth activated (CAMM module only)
Unit in programming mode.
Gas alarm on mute
The display shows the type of gas detected.
The value displayed should be multiplied by 10.
The display shows the current gas
concentration in ppm (parts per million).
Fixed:
Set Hold mode activated
Flashing:
Maintenance mode activated
If the gas Pre-Alarm or Alarm sounds, pressing once will mute the alarm tone (See parameter
b03
).
In the programming menu, it exits the parameter without saving changes, returns to previous level or
exits programming.
Pressing for 3 seconds activates or deactivates Set Hold mode (See page 11).
Pressing for 6 seconds activates or deactivates maintenance mode (See page 11).
In the programming menu it allows scrolling around the different levels, or during the setting of a
parameter, changing its value.
Pressing once (< 1 second) will show the type of gas detected, the date and time in sequential order.
Pressing for 3 seconds displays the Pre-Alarm and Alarm levels that have been configured.
In the programming menu it allows scrolling around the different levels, or during the setting of a
parameter, changing its value.
Pressing for 3 seconds accesses the configuration of alarm levels (See page 14).
Pressing it for 6 seconds accesses the advanced programming menu (See page 14).
In the programming menu, it accesses the level shown on the display or, during the setting of a
parameter, accepts the new value.
Keypad
Display
Gas sensor
Keypad
Fixed:
Gas pre-alarm activated.
Flashing:
Gas alarm activated.
Fixed:
CAMM module in operation
Flashing:
Malfunction in CAMM module
Indicators
Summary of Contents for AKO-575 Series
Page 1: ...AKO 575xxx Gas transmitter User manual GB 5750H002 Ed 03...
Page 26: ...5750H002 Ed 03 26...
Page 27: ...5750H002 Ed 03 27...
