AKO AKO-21006, User Manual

Page: 81 / 120

81
The DUOControl controllers record the
activation and deactivation of the alarms.
The alarm log holds a record of the last 50
alarm events. For further information regarding the
detection of alarms, see
Chapter 6.
3.3.13.- ALARM LOG
There is a text string corresponding to each of the alarms, as shown in the following table:
ALARM TYPE
Safety circuit for compressor 1
Safety circuit for compressor 2
Safety circuit for compressor 3
Safety circuit for compressor 4
Safety circuit for compressor 5
Safety circuit for compressor 6
Safety circuit for fan 1
Safety circuit for fan 2
Safety circuit for fan 3
Safety circuit for fan 4
Safety circuit for fan 5
Safety circuit for fan 6
Safety circuit for fan 7
Safety circuit for fan 8
General low pressure switch
General high pressure switch
High pressure pre-alarm
Low pressure pre-alarm
Discharge probe error
Suction probe error
Ambient air temperature probe error
Inverter safety circuit
Installation blocking due to frequent high pressure
Compressor maintenance
ALARM
ACTIVATION
ON CSCMP1
ON CSCMP2
ON CSCMP3
ON CSCMP4
ON CSCMP5
ON CSCMP6
ON CSFAN1
ON CSFAN2
ON CSFAN3
ON CSFAN4
ON CSFAN5
ON CSFAN6
ON CSFAN7
ON CSFAN8
ON PRESOSE
ON PRESOSC
ON PREALRME
ON PREALRMC
ON SDESCAR
ON SASPIRA
ON STEXT
ON CSVAR
ON BLOQINST
ON MANTCMP
ALARM
DEACTIVATION
OFFCSCMP1
OFFCSCMP2
OFFCSCMP3
OFFCSCMP4
OFFCSCMP5
OFFCSCMP6
OFFCSFAN1
OFFCSFAN2
OFFCSFAN3
OFFCSFAN4
OFFCSFAN5
OFFCSFAN6
OFFCSFAN7
OFFCSFAN8
OFFPRESOSE
OFFPRESOSC
OFFPREALRME
OFFPREALRMC
OFFSDESCAR
OFFSASPIRA
OFFSTEXT
OFFCSVAR
OFFBLOQINST
OFFMANTCMP
DISPLAY MESSAGE
ALARM LOG
ERASE LOG
DISPLAY
we make it easy