1.- Presentation
PROPlus 3PH is the global electronic solution to manage positive and negative cold room stores, in combination with:
Ÿ
Standard condensing units
Ÿ
Streamlined condensing units
Ÿ
Or as a service panel in decentralised systems.
It has a high IP65 degree of protection for installation in damp environments. It is easy to install thanks to its new
connection strip and intuitive menus with help texts that make programming easier by using its backlit LCD display.
1.1.- Maintenance
Clean the surface of the unit with a soft cloth, water and detergent. Do not use abrasive detergents, petrol, white
spirits or solvents.
Units that include rechargeable electrical accumulators:
This unit includes accumulators that should be replaced when the unit's battery life is under the duration
assigned in its specifications. At the end of the useful life of the unit, the accumulators should be taken to a
selective waste collection centre or returned to the manufacturer.
1.2.- Cautions
Using the unit not observing the manufacturer's instructions may alter the appliance's safety requirements. Only probes
supplied by AKO should be used for the it to operate correctly.
2
From –40 ºC to +20 ºC, if the NTC probe is extended to 1000 m with at least 0.5 mm cable, the maximum deviation
will be 0.25 ºC (cable for probe extension ref.
AKO-15586
).
IMPORTANT:
Ÿ
The function of each probe depends on the "probe setting" parameter (See probe configuration on page 14).
Ÿ
The AUXILIARY relay is programmable, and its operations depends on the configuration (See page 26).
Ÿ
The function of the digital inputs depends on the configuration (See page 25).
Ÿ
The recommended currents and powers are the maximum working currents and powers.
3
1565H041 Ed.03
Summary of Contents for AKO-15650
Page 35: ...1565H041 Ed 03 35 ...
