It allows configuring the operating parameters.
8.- Programming menu
The programming menu allows adjusting the unit's parameters to the installation's needs.
Press the
SET
key for 5 seconds to access the programming menu. If the access code is activated, a 2 digit code is
requested (See page 26), if the code entered is not correct the unit will not enter programming.
The parameters are grouped by functions in 12 separate menus, to access a given menu, select it using the browser and
press
SET
(For more details, consult page 29).
Function of the keys in programming
8.1.- Basic initial configuration
3
Language
It defines the language of the menus and helps displayed on the screen.
G
Set point (SP)
It defines the temperature that should be inside the cold storage room (See page 16):
Ÿ
Minimum: –40.0 *
Ÿ
Maximum: 320 *
*(Depends on the bottom/top locking of the set point).
Calibration of Probe 1
It allows correcting the temperature detected by probe 1, this is particularly useful when the probe cannot be
located in the ideal place.
SET
SET
SET
SET
SET
?
ESC
Moves the selection down or decreases the value of
the parameter.
Moves the selection to the right.
Displays the help for the selected parameter or
function.
Moves the selection up, or increases the value of the
parameter.
Moves the selection to the left.
Accepts the value or accesses the selected menu.
Allows exiting a parameter without saving the
changes, returning to the previous menu or exiting
programming.
8.- Programming menu
The programming menu allows adjusting the unit's parameters to the installation's needs.
Press the
SET
key for 5 seconds to access the programming menu. If the access code is activated, a 2 digit code is
requested (See page 26), if the code entered is not correct the unit will not enter programming.
The parameters are grouped by functions in 12 separate menus, to access a given menu, select it using the browser and
press
SET
(For more details, consult page 29).
Function of the keys in programming
8.1.- Basic initial configuration
3
Language
It defines the language of the menus and helps displayed on the screen.
G
Set point (SP)
It defines the temperature that should be inside the cold storage room (See page 16):
Ÿ
Minimum: –40.0 *
Ÿ
Maximum: 320 *
*(Depends on the bottom/top locking of the set point).
Calibration of Probe 1
It allows correcting the temperature detected by probe 1, this is particularly useful when the probe cannot be
located in the ideal place.
13
1565H041 Ed.03
Summary of Contents for AKO-15650
Page 35: ...1565H041 Ed 03 35 ...
