16
Model No.: AC-S10HGX2
Version: 1.0
Disassemble the water-tray assy
Press the drainage pipe
jpint tightly and take off
the drainage pipe
anticlockwise.
Disassemble the guide
louver, bend it with your
finger at full tilt and pull
out the guide louver.
Screw off 2 pcs bolt
which fix the stepping
motor and take off the
stepping motor.
Disassemble evaporator
To screw off the tapping
screws from the back of
rear case, which fix the
rear plate and push up the
clasp of rear case and pull
out the connection pipe.
To screw off 1 pc screw,
which is in the left side of
evaporator and 3pcs
screws in the right side of
evaporator, press the
lowleft of the evaporator
and move it and take out
the side-board clasp from
the groove and take out
the evapoator carefully
and pay attention to
protect connection pipe.
Guide louver
Bolts
Stepping motor
Screws
Screws
Screws
Все каталоги и инструкции здесь:
http
:
//splitoff.ru/tehn-doc.html
