AKG DMM14 U, Reference Manual

Page: 119 / 259

operAting the Device
DMM14 MANUAL 119
Step Description
1
With
SYSTEM CONTROL
, select the
PRESET
function
2 Briefly press the rotary knob for the corresponding input or
output.
• An acoustic signal (beep) is sounded.
3 Release the rotary knob after the beep
• Device preset is loaded to work preset
• Settings for the selected device preset are active immedi-
ately (all LEDs lit)
8.7.2 Programming a preset
To program a preset, proceed as follows:
Step Description
1 With
SYSTEM CONTROL
, select the
PRESET
function
2 Press input rotary knobs (1 to 12) for between 3 and 5 sec-
onds.
• An acoustic signal (beep) is sounded.
3 Release the rotary knob after the beep
• The current settings from the work preset are stored under
the selected device preset (all LEDs lit)
8.7.3 Deleting a preset
To delete a preset, proceed as follows:
Step Description
1 With
SYSTEM CONTROL
, select the
PRESET
function