operAting the Device
DMM14 MANUAL
115
8
Operating the device
8.1
SYSTEM CONTROL: Changing parameters on the device
To change the parameters on the device, proceed as follows:
Step Description
1
Turn to the required function on the
SYSTEM CONTROL
rotary knob, turning the rotary knob until the LED is lit at the
required function.
2
Modify the inputs with the selected function using the
IN 1
to
IN 12
rotary knobs
3
Modify the outputs with the selected function using the
OUT 1
and
OUT 2
rotary knobs
The stereo record output does not have any setting options.
5 minutes after the last change, the
SYSTEM CONTROL
rotary knob goes
back to the
LEVEL
mode. 1 minute after the last change, the set value is
saved automatically.
8.2
Configuring microphones on the DMM14 U (UL, ULD)
To configure the connected microphones and accessories, proceed as
follows:
SYSTEM
CONTROL
Summary of Contents for DMM14 U
