Ultrasonic Fuel Level Sensor Manual
Updated until firmware 405p & 1.0.3816
- 7 -
B) The Non-Invasive Fuel Sensor Unit UFLS-NI
Fig 2. AKCP Non-Invasive Ultrasonic Fuel Level Sensor (UFLS-NI)
The front of the unit has one LED which indicates status. Blinking blue LED indicates the sensor
is sensing liquid. Solid blue LED indicates sensor is not sensing liquid. One end of the unit has
the green phoenix connector for connecting the sensor or sender unit, while the other side has an
RJ45 connection for connecting to the RJ-45 sensor port on your AKCP base unit via CAT5/6
cable which can be extended up to 100 feet.
Technical drawing
