9. Wind Noise Reduction:
On / Off
Default setting is Off.
Turn on Wind Noise Reduction, it can lower the noise to an acceptable level.
10. Angle:
Wide / Medium / Narrow
Default setting is Wide.
The angle refers to how much of the scene can be captured through the camera lens.
Wide angle captures the largest amount of the scene, while Narrow angle captures the least.
Note:
Medium and Narrow is disabled when Image Stabilization is on.
11. Sound Record:
On / Off
Default setting is On.
Turn off Sound Record, the camera does not record audio when you record video.
12. Auto Low Light:
On / Off
Default setting is Off.
Auto Low Light mode will automatically adjust settings according to lighting conditions to
achieve the best low light performance. Even if you move back and forth between bright
and dark environments, you do not need to manually adjust the camera settings.
Note:
Auto Low Light is disabled when you select 4K / 60FPS, 4K / 30FPS, 2.7K / 60FPS or
2.7K / 30FPS video resolution.
13. Drive Mode:
On / Off
Default setting is Off.
If you turn on Drive Mode and connect camera with car cigarette lighter, the camera will
turn on automatically if you start your car and will turn off if you stop your car.
PHOTO SETTING
1. Photo Resolution:
20MP / 16MP/ 12MP / 10MP / 8MP/ 5MP
Default setting is 20M.
2. ISO:
Auto / 100 / 200 / 400 / 800 / 1600 / 3200
Default setting is Auto.
ISO determines the camera’s sensitivity to light, and creates a trade-off between brightness
and resulting image noise. Image noise refers to the degree of graininess in the image.
3. Time Lapse Interval:
Unlimited / 3 Sec / 5 Sec / 10 Sec / 30 Sec / 1 Min
Default setting is Unlimited.
Time Lapse Photo captures a series of photos at specified intervals. Use this mode to
capture photos of any activity, then choose the best ones later.
Note:
Time Lapse Photo is disabled when Burst Photo is on.
4. Time Lapse Duration:
Unlimited / 5 Min / 10 Min / 15 Min / 20 Min / 30 Min / 60 Min
Default setting is Unlimited.
Note:
If you want to set Time Lapse Duration, please turn on Time Lapse Interval first.
5. Night Lapse:
On / Off
Default setting is Off.
Captures a series of photos at specific intervals and exposure times. Use Night Lapse in low
light environments, such as when capturing the night sky over a period of time.
6. Burst Photo:
Off, 3 shots / 1s, 7 shots / 2s, 15 shots / 4s, 30 shots / 8s
Default setting is Off.
Burst captures up to 30 photos in 8 seconds, so it is perfect for capturing fast-moving
activities.
7. Delay Timer:
Off / Delay 3s / Delay 5s / Delay 10s / Delay 20s
Default setting is Off.
A delay timer gives a delay between pressing the shutter release and the shutter's firing. It
is most commonly used to let photographers to take a photo of themselves (often with
family).
8. Long Exposure:
Off / 1 Sec / 2 Sec / 5 Sec / 8 Sec / 30 Sec / 1 Min
Default setting is Off.
Long exposures are easiest to accomplish in low-light conditions, but can be done in
brighter light using neutral density filters or specially designed cameras.
Note:
Long Exposure is disabled when Burst Photo is on.
09
10
