1. Turn on camera.
2. Press and hold the Down button for three seconds to turn on BT. The screen shows ‘BT
ON’ - ‘Scanning’.
Note:
You can also go to Camera Setting to turn on BT.
3. Press and hold the Power button Press and hold the Power button for three seconds to
turn on remote. . The remote indicator flashes every second during connecting.
4. The camera screen shows ‘Connected’. Remote indicator remains on after V50 Elite
connects with remote successfully.
Note:
Photo indicator flashes when you take a photo. Video indicator flashes two seconds
during video recording.
CONNECTING YOUR V50 ELITE WITH REMOTE
CONTROLLING YOUR V50 ELITE WITH YOUR VOICE
14. Format Card:
Yes / No
Default setting is No.
• To keep your micro SD card in good condition, reformat it on a regular basis.Reformatting
erases all of your content, so be sure to offload your photos and videos first.
• To reformat your card, please enter Camera Setting, then press Up or Down button to
scroll through the options to locate ‘Format Card’ option, press shutter Button - Up
Button - Shutter Button.
15. System
Default Setting: Yes / No
System Info: V50 Elite: YYYYMMDD-V1
Card Info
Default Setting option resets all settings to their default values.
System Info option let you check the model, version and updated time of your V50 Elite.
Card Info option let you check the capacity and free space of your micro SD card.
Some functions cannot be used at the same time. Please refer to the information below.
Image Stabilization
Image Stabilization
4K / 60FPS, 2.7K / 60FPS, 1080P / 120FPS, 720P / 240FPS,
720P / 120FPS, 720P / 60FPS
Slow Motion Movie
Image Stabilization
Angle: Middle, Narrow
Image Stabilization
Zoom
Image Stabilization
Time Lapse Video
Image Stabilization
Date Stamp
Distortion Calibration
4K 60FPS
Loop Recording
4K 60FPS
Burst Photo
Time Lapse Photo
Burst Photo
Long Exposure
You can control your V50 Elite with your voice using a set of specific commands (see list
below).
Note:
Voice Control performance may be impacted by distance, wind, and noisy conditions.
Keep the product clean and clear of debris.
USING VOICE CONTROL
Voice Control works best when you say a command to the remote mic directly.
1. Turn on camera and remote.
2. Connect camera with remote.
3. Say a command to the remote mic from list below.
Note:
Voice Control also turns off when your camera powers off.
Camera Turn Off
Powers off the camera
Action Start Video
Action Stop Shooting
Action Photo
Stops capturing video
Captures a single photo
Action Command
Description
Starts capturing video
13
14
