background image

ROADSTART UNITS

MODEL NO’S: 

RS1.V5 / RS102.V4 / RS103.V3

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, 

and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETY

IMPORTANT:

 To reduce the risk of a battery explosion, follow these instructions and those published by the battery manufacturer and the 

manufacturer of any equipment you intend to use in the vicinity of the battery. Remember to review warning marks on all products and on engines. 

Modern vehicles contain extensive electronic systems. You are required to check with the vehicle manufacturer, for any specific 

instructions regarding the use of this type of equipment on each vehicle.

No liability will be accepted for damage/injury, where this product is not used in accordance with all instructions.

1.1.    

PERSONAL  PRECAUTIONS

 

9

   Ensure there is another person within hearing range, or close enough to come to your aid should a problem arise, when working near a  

  lead-acid battery.

 

9

   Have fresh water nearby in case battery acid contacts skin, clothing or eyes.

 

9

   Wear safety eye protection and protective clothing. Avoid touching eyes while working with a battery.

 

9

   If battery acid contacts skin or clothing flush area with water. If acid enters eye, flush eye immediately with cool, clean running water for  

  at least 15 minutes and seek immediate medical attention. MSDS available from sealey.co.uk.

 

9

   Remove personal metallic items such as rings, bracelets, necklaces and watches. A lead-acid battery can produce a short-circuit current  

  high enough to weld a ring or the like to metal, which may cause severe burns.

1.2.    

IMPORTANT SAFETY INSTRUCTIONS

 

9

   Familiarise yourself with the applications, limitations and potential hazards of the RoadStart.

 

9

   Keep the unit in good working order and condition. Replace damaged parts immediately.

 

9

   Use only recommended parts. To use unapproved parts may be dangerous and will invalidate your warranty. 

 

9

   The RoadStart must only be opened and checked by qualified service personnel. 

DO NOT

 disassemble the unit for any reason.

 

9

   Keep children and unauthorised persons away from the work area.

 

9

   Keep work area clean and tidy and free from unrelated materials. 

 

9

   Ensure that there is adequate lighting. 

 

9

   If the RoadStart receives a sharp knock or blow, it must be checked by a qualified service agent before being used.

 

9

   When not in use re-charge every two months. 

 

8

   DO  NOT

 smoke or allow a spark, or flame in the vicinity of the battery or engine.

 

8

   DO NOT

 drop any metal item onto the battery as it may spark or short circuit the battery, which could cause an explosion. 

 

8

  

DO NOT

 use RoadStart to recharge dry cell batteries that are commonly used with home appliances. These batteries may explode and  

  cause personal injury and damage to property.  

 

8

  

DO NOT

 charge or boost a frozen battery.

 

8

   DO NOT

 use attachments other than those recommended. To do so may risk damage to the unit and other equipment and possible 

 

personal injury. 

 

8

 

  DO NOT 

pull or carry the unit by its cables and do not pull the negative and positive clamps from the battery terminals.

Wear 

Protective 

Gloves

Warning:

Electricity

Protect 

From 

Rain

Use in

Well 

Ventilated

Areas 

Keep away 

from sources 

of ignition:

Battery could 

explode

Refer to

Instruction 

Manual

Warning:

Explosion

Risk

Wear eye

Protection

Warning:

Corrosive 

substance

IMPORTANT WARRANTY INFORMATION: KEEP YOUR ROADSTART HEALTHY

Read and understand the general safety and operating instructions before use. The following information is intended to help you 

keep the product in top working order.

NOTE - The battery in this unit is a consumable item and its ability to accept charge will reduce over time. We will warranty it against 

mechanical and electrical defect for a period of one year - this does not cover fair wear and tear. 

If the battery is not properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances we will not 

replace the battery even if it is less than one year old.

You can help prolong the life cycle of the battery by following a few simple guidelines. 

Plug in your new Roadstart to the mains transformer and make an 

INITIAL

 charge lasting 72 hours.

Ensure the unit is fully charged before storage.

 

DO NOT

 leave the Roadstart for longer than 2 months without putting it on charge.

 

DO NOT

 attempt to start a vehicle when the Roadstart battery voltage is reduced to less than 7.25Volts.

 

DO NOT

 drop or roughly handle the Roadstart - this will break or disjoin the battery terminals rendering the battery useless and the warranty 

void.

 

DO NOT

 use any other charger, other than the one supplied, to recharge the battery.

DO NOT

 obstruct the ventilation grilles and protect against water ingress - these RoadStart units are fitted with ventilation grilles to help 

disperse any gases produced during the charging procedure. 

RS1.V5 RS102.V4 RS103.V3 Issue 7 (3,4) 29/4/19

Original Language Version

© Jack Sealey Limited

Summary of Contents for RS103.V3

Page 1: ...lated materials 9 9 Ensure that there is adequate lighting 9 9 If the RoadStart receives a sharp knock or blow it must be checked by a qualified service agent before being used 9 9 When not in use re charge every two months 8 8 DO NOT smoke or allow a spark or flame in the vicinity of the battery or engine 8 8 DO NOT drop any metal item onto the battery as it may spark or short circuit the battery...

Page 2: ...e appliance and the safety of the appliance operator If in any doubt about electrical safety contact a qualified electrician 1 3 3 DO ensure that the insulation on all cables and the product itself is safe before connecting to the mains power supply 1 3 4 DO ensure that cables are always protected against short circuit and overload 1 3 5 DO regularly inspect power supply leads plugs for wear and d...

Page 3: ...dstarts in a European country remove the 3 pin UK plug by pushing the button on the adapter and turning anti clockwise replace with the 2 pin plug placing it on the transformer and turning clockwise until fully home fig 5 5 OPERATION WARNING You must follow the safety instructions 5 1 PREPARATION AND PRECAUTIONS WARNING Ensure that the roadstart and vehicle voltages are the same 5 1 1 Apply the ve...

Page 4: ...ero its power however will be lessened Intense heat will activate self discharge I have a regular 10 amp battery charger can I use it to recharge the RoadStart No Only the supplied adaptor and charger can be used Is the RoadStart fool proof No All jump starting instructions must be followed carefully Can I replace the internal batteries Yes but note that the batteries are not covered by warranty a...

Reviews: