4
3
12. Any luggage or other objects liable to cause injuries in the event of a
collision shall be properly secured.
13. The rigid items and plastic parts of a child restraint must be so located
and installed that they are not liable , during everyday use of the vehicle
to become trapped by a moveable seat or in a door of the vehicle.
14. To prevent from the risk of fall, your child should always be fastened.
15. It is dangerous to make any alteration or additions to the device without the
approval of the competent authority, and a danger of not following closely the
installation instructions provided by the child restraint manufacturer.
17. The child restraint must not be used without the cover.
18.The seat cover should not be replaced with any other than the one
recommended by the manufacturer, because the cover constitutes an integra
part of the restraint performance.
19. Before you adjust any movable or adjustable parts of your child seat ,
you must remove your baby from the child seat.
20. The child seat should be kept away from sunlight if the seat is not provided
with a textile, otherwise it may be too hot for the child’s skin.
21
.
Never use a second-hand product , as you can never be certain what wa
happened to it.
4
.
Usage
4.1 Install position of the child seat in vehicle
This child seat is suitable for conventional
use in all cars equipped with 3 point seat
belts that are fitted in accordance with
European standard(ECE R16 or equivalen
standard)
The child seat must only be installed using
a lap and diagonal seat belt.
Important:
Correct fitting/suitable
Incorrect fitting/not suitable
4.2 Checking the shoulder strap height
Always check that the shoulder straps are at the correct height for your
child. The child’s shoulders should always be thread through the slots
in the cover and seat shell that are closest to the top of your child’s
shoulders.
4.3 Usage of buckle
Firstly ,adjust the shoulder straps height ,please proceed as follows:
Step1.
Step2. Slot the two buckle connectors into the slot in the buckle until
they
“
click
”
place.
Step3. Check the harness is correctly locked by pulling the shoulder
straps upwards.
To release the harness ,you can press the red button of the buckle
downwards, the two metal sections will be pop up .
Put the two metal sections of the buckle connector together.
Not to be used on this seat if a
passenger front airbag is active.
Only use on this seat if a lap and
diagonal seat belt is fitted.
NO-Too low
NO-Too high
Yes -Correc
t
Lap belt
Lap belt and
diagonal belt
?
2
?
1
click
16.This child seat is designed for children from birth up to 25kg.Never overload
the child seat more than one child or with other loads.
?
2
?
1
