Akarana Baby HB919 Instruction Manual Download Page 2

2

1

2

.

Feature

    

    

  2

.

This  child  seat  can  be  installed  rearward-facing  and  forward-facing  using  a 

three-point lap and diagonal seat belt . Important - Do not using forward-facing 
before the child’s weight exceeds 9kg.

This instruction manual can be retained in the special space of the child seat 

for its life 

.

 4. Do not use this child seat in the home. It has not been designed for home use 
and should only be used in your car.
 5. Do not leave your child unattended in the child seat at any time.
 6. Do not place rearward-facing child seat in seating positions where an active 
frontal airbag installed. Death or serious injury can occur.   
 7.The child seat should be changed when it has been subject to violent stresses 
in an accident.
 8. For the reason of safety, the child seat must be fixed inside the vehicle
even if you do not put your child inside the child seat.
 9. Always make sure that any straps holding the seat restraint to the vehicle 
shall  be  tight  ,  any  straps  restraining  the  child  should  be  adjusted  to  the 
child’s body, and check that the straps shall not be twisted.
10. Ensuring that any lap straps is worn low down , so that the pelvis is firmly 
engaged, shall be stressed.
11. Do not use any load bearing contact points other than those described in 
the instructions and marked in the child restraint.

  

For your child’s safety, please read these instructions carefully before use and 

keep them for future reference. Failure to follow the instructions contained in this 

manual could result in serious injury to your child.

 3. 

period

3

.

Safety warning

  1

.

Structure

press

Comfortable

 

cushion

Shoulder strap slot

Shoulder strap

Crotch pad

Adjuster

(Under the cover)

Backrest

Chest

 

pad

Buckle

Crotch strap

Belt guide hook

(for rearward facing)

Harness

 

adjuster

 

strap

Positioning 

andle

h

belt guide hook

belt guide hook

Base

belt guide 

(for forward facing)

Harness connector

Base support

Belt guide hook

(for rearward facing)

    1. The backrest of the child seat can be adjusted to 3 different incline positions,
that is the child can sit or recline during the travel.
    2. This shoulder strap height of the child seat With 4 adjustable shoulder strap 
height.

   3. This child seat can  be used for children 0-7 years old, installed 
rearward-facing or forward-facing.

    1. This child seat can only be used with the harness for children less than 
  18kg in weight (group 0+,less than 13kg; group

, 9-18kg).This child seat 

  can be used without harness for children of 15-25kg in weight (group II).

Top

Side

Back

Bottom belt guide 

Red button 

Side protection 

Summary of Contents for HB919








Reviews: