8
7
Step3. Then re-thread the shoulder
straps into the appropriate strap slots
from the front of the child seat and
slide them in
its
connector.
Important: Make sure that both of the
shoulder belts go through slots at the
same height, and not twisted.
4.7 Remove the crotch pad and buckle
Adjust the child seat to
position 3 and turn it to the
bottom. Turn the harness
locking clip on their
narrowest end and thread it
through the slot under the
bottom of the child seat. So
the crotch pad and buckle
as well as harness straps
can be removed.
Step2.
Pull the straps through the
shoulder strap slots from the front
of the child
seat. Now you can remove
the shoulder straps and chest pad
.
4.8 Usage of base support
Step1: Adjust the child seat to incline
position 3 and drawback the base
support.(see 4.5 of page 5 and 4.8
page 8)
5. Installation of the child seat
5.1This child seat can be used with the harness for children less than 13kg
in weight (group 0+), installed rearward facing using a three-point lap and
diagonal seat belt .
The base support located in the child
seat base is used for the child of group
0+.Turn the child seat to the bottom, put
forth your strength to drawback the
base support.
press
1
2
3
1
2
3
