Akai HV 10, Operator'S Manual

Page: 28 / 43

20
✽
To switch between the Main Parameter and Sub Parameter, it is necessary to set the Sub Parameter
setting to ON (refer to the Setting the Sub Parameter ON/OFF).
Setting the Sub Parameter ON/OFF
In Edit mode, select the Sub Parameter you want to set using the BANK/DATA control.
Using the Cursor buttons, move the cursor down to the lower line of the screen and then select the
parameter. Pressing the BYPASS button while holding down the selected PROGRAM button
(PROGRAM A or B) turns the Sub Parameter ON, enabling the switching of Main Parameter and Sub
Parameter (the sub mark appears at the lower left of the screen). To turn the Sub Parameter OFF,
select the parameter that is turned on and then press the BYPASS button while holding down the
PROGRAM button (PROGRAM A or B) (the sub mark at the lower left of the screen disappears).
Here, we explain the setting of Sub Parameters in STYLE mode as an example.
Setting the Sub Key
As an example, we set the Main Key as C/Am and Sub Key as E /Cm (The Preset Program
[BANK17 PROGRAM A Oct Unison] is used).
1. Press the EDIT button. Confirm that the lower line of the screen shows [STYLE]. (If not, press the
< button to move the cursor down to the lower line of the screen and then select [STYLE] using the
BANK/DATA control. Press the EDIT button to move the cursor up to the upper line of the screen.)
2. Select [KEY] using the BANK/DATA control.
3. Press the < button to move the cursor down to the lower line of the screen and select [C/Am] using
the BANK/DATA control (Main Key).
4. Press the BYPASS button while holding down the PROGRAM A button (the sub mark appears at
the lower left of the screen).
5. While the PROGRAM A button is held pressed, select [E /Cm] using the BANK/DATA control (Sub
Key).
The [E /Cm] (Sub Key) is displayed when the PROGRAM A button is pressed and the [C/Am] (Main
Key) is displayed when released. This is the only step for the Sub Key setting.
✽
In the above example, the Sub Key for the PROGRAM A is set. To set the Sub Key for the PROGRAM
B, use the PROGRAM B button, instead of PROGRAM A button, in above.
Setting the Sub Style
As an example, we set the Main Style as 3A and Sub Style as 3E at harmony L2 (The Preset
Program [BANK17 PROGRAM A Oct Unison] is used).
1. Press the EDIT button. Confirm that the lower line of the screen shows [STYLE]. (If not, press
the < button to move the cursor down to the lower line of the screen and then select [STYLE]
using the BANK/DATA control. Press the EDIT button to move the cursor up to the upper line of
the screen.)
2. Select [VOICING] parameter using the BANK/DATA control.
3. Press the < button to move the cursor down to the lower line (L2) of the screen and select [3A]
using the BANK/DATA control (Main Style).
4. Press the BYPASS button while holding down the PROGRAM A button (the sub mark appears
at the lower left of the screen).
EDIT Mode