Akai HV 10, Operator'S Manual

Page: 18 / 43

10
2. Turn the BANK/DATA control to select KEY parameter.
3. Press the < button to move the cursor down to the lower line of the screen and select [C/Am] using
the BANK/DATA control.
4. Press the EDIT button to move the cursor up to the upper line of the screen and select VOICING
parameter using the BANK/DATA control.
5. Press the > button to move down the cursor to the lower line of the screen (H2) and select [U1]
using the BANK/DATA control.
6. Press the EXECUTE/STYLE EDIT button to switch it to the STYLE EDIT screen.
7. Move the cursor using the < button to the ORIGIN and select [C] using the BANK/DATA control.
8. Move the cursor using the > button to H2.
In this example, as we’re making the major 3rd style, set the harmony note at H2 to [E].
Repeat steps 7 and 8 to complete the setting of the harmony notes for the entire octave referring
to the chart.
9. In STYLE EDIT screen, pressing the EDIT button moves the cursor up to the upper line of the
screen and pressing it again returns to the VOICING parameter screen.
✽
It is also possible to set the settings using the MIDI note information sent from the external MIDI
keyboard, instead of using the BANK/DATA control.
Note 2: The indication of Style setting changes according to the KEY selected in KEY parameter.
Note 3: The Style editing is available only for the User Style. When the Preset Style is selected,
you can see the settings, but it’s not editable.
The User Styles (U1~U9) are not available for each program, but are common to all programs.
For example, if the U1 is edited in one program, the U1 used in another program is changed as
well.
Copying the Style
This is used when making the User Style based on the Preset Style.
In EDIT mode, while the User Style (U1~U9) is selected in the VOICING parameters, the style can be
copied. Here, we copy the Style of 3A into U2.
1. In EDIT mode, select VOICING parameter using the BANK/DATA control.
2. Press the < button to move the cursor down to the lower line of the screen.
3. Select [U2] using the BANK/DATA control.
4. Press the EXECUTE/STYLE EDIT button to switch it to the STYLE EDIT screen.
5. Press the EDIT button to move the cursor up to the upper line of the screen.
6. Select [COPY STYLE] using the BANK/DATA control.
7. Press the < button to move the cursor down to the lower line of the screen.
8. Select the [3A] using the BANK/DATA control.
9. Pressing the EXECUTE/STYLE EDIT button copies the Style in 3A to the U2 ([COPY COM-
PLETED!] flashes).
EDIT Mode