Akai HV 10, Operator'S Manual

Page: 10 / 43

2
Names and functions
7. EXECUTE/STYLE EDIT button
Used to save the edited program and/or to copy the program. In EDIT mode, used to switch between
the STYLE EDIT and CHORD EDIT screen (in the STYLE or CHORD mode only).
8. BANK/DATA control
In PLAY mode, selects the BANK. In EDIT mode, selects the parameter or changes the parameter
value.
9. BYPASS button
Switches between the DRY sound and EFFECT sound. While it is on, the LED lights up and the DRY
sound comes out. When it is connected using the XLR input and the XLR output, the input signal does
not go through the internal circuit, thus the original vocal sound comes out clean without any coloration.
(True Bypass).
In EDIT mode, it is also used as SOLO function (refer to VOICE parameter in EDIT mode).
10. OUTPUT LEVEL control
Sets the output signal level.
11. INPUT LEVEL control
Sets the input signal level. Set it as high as possible in the range that the OVER (RED) LED of the
Input Level Indicator will not light up.
12. Input Level Indicator
Indicates the input signal level. The OVER (RED) LED lights up when the input level is too high.
13. KEY
In PLAY mode, indicates the Key of the program (with STYLE, CHORD and MODAL mode programs
only).
14. L2
In EDIT mode, indicates the status of Harmony L2.
15. L1
In EDIT mode, indicates the status of Harmony L1.
16. ORIGIN
In EDIT mode, indicates the status of Original voice.
17. H1
In EDIT mode, indicates the status of Harmony H1.
18. H2
In EDIT mode, indicates the status of Harmony H2.