After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [email protected]
9
Hotplate preparation
• The top surface of the hotplates are sealed with a heat-resistant coating.
Before first use, the hotplates should be heated for a short period without
a pot or pan on it to harden the protective coating. If this is not done,
premature rusting may occur.
Simply turn the heat setting to high for 3–4 minutes to fully harden the
coating. When the hotplates have cooled, we recommend you apply a thin
coating of a hotplate protector to seal and protect the surface.
Oven preparation
• Turn the oven to a temperature of 250°C for approximately 30 minutes to
burn off any dust, oil or other remnants from manufacturing or transport.
When cooled, wipe away any residue.
NOTE: When heating the oven for the first time it is normal for the
appliance to give off smoke and odours. These will be gone after
approximately 30 minutes. This is due to the components being
new and is no cause for concern. Ensure sufficient ventilation.
• Your new freestanding electric cooker is now ready for use.
Getting Started (Cont.)
CAUTION!
The appliance becomes very hot during use. Take care to avoid burns.
Always keep children away and supervise when the cooker is in use.
