After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [email protected]
24
Other Useful Information (Cont.)
Removing the oven door
To make cleaning easier, you can remove the
oven door. Just follow the simple steps below:
• Open the oven door completely.
• Tilt the safety catch part of the hinge
upwards (Fig. 9).
• Close the door lightly, lift and pull it out
towards you (Fig. 10).
• In order to fit the door back on to the oven,
do the reverse. When fitting, make sure to
place the notch of the hinge correctly on
the protrusion of the hinge holder.
• After the door is fitted to the oven, the
safety catch should be carefully lowered
down again. If the safety catch is not set
it may cause damage to the hinge when
closing the door.
Removing the door’s glass panel
The glass panel inside the door can be
removed for thorough cleaning. To do so:
• Unscrew and unfasten the plastic latch
in the corner at the top of the door (Fig. 11).
• Next take out the glass from the second
blocking mechanism and remove.
• After cleaning, insert and block the
glass panel, and screw in the blocking
mechanism.
Other repairs or service inspections
Besides keeping the oven clean, regularly inspect the control dials and
heating elements. In case of damage, or if you experience any problems
with the appliance, contact our after sales support line to arrange a technical
inspection of the oven and fix any operational faults. Do not attempt to carry
out any repairs yourself!
Fig. 9
Fig. 10
Fig. 11
