Akai AK22FLEDCG, Instruction Manual

Page: 51 / 56

51
FAQs
Problem Action
No picture, no sound 1. Check that you have connected the TV power
cord properly and switched the wall socket on.
2. Check that you have turned on the POWER
button on your TV.
3. Check the picture contrast and brightness
setting.
Normal Picture, but no sound 1. Check that your TV is not muted or has the
volume down.
2. Switch the channel, the problem may be with
the channel you’re on, not the TV.
3. Check that your audio cable input has been
plugged in properly, if you are using an external
amplifier.
Remote control does not work 1. Check to see if there is any object between your
TV (such as a piece of furniture) that could block
the remote control from connecting with the
sensor on your TV.
2. Have you put the batteries into the remote
control the right way? ( + to + and - to -)
3. Check that the TV is not positioned in bright
sunlight.
4. Try fitting new batteries if none of the above
work.
TV turned off suddenly 1. Check that you have not set the sleep timer.
2. Check that you have not set the timer to control
the socket which has your TV power cord on.
3. Check that you have not set auto standby with the
broadcast signal source which is connected to your
TV.
Picture appear slowly after
TV switched on
This is normal. The image takes a few seconds to
appear after you have switched the TV on. Please
contact your service centre if picture has not
appeared after five minutes.