36
In this case it is necessary to turn off the device and replace the batteries. To
insure the proper charge level of the batteries is displayed insure that the correct
battery type has been selected (
Alkaline
or
NiMh
).
USE OF HEADPHONES
Your metal detector is supplied with a 3.5mm (1/8”) headphone jack. The jack is
located on the rear of the control panel. It is preferred to use stereo type headphones
with independent volume controls. The audio profile of the headphones is stored separate
of the speaker profiles.
PROGRAM ADJUSTMENT OF COILS
Your Berkut 5 is preconfigured to work with the coils manufactured by AKA LLC.
There are a couple ways to configure the coils to work with your device by using built in
programs designed for this operation:
Adjusting coil to the current profile
Addition of the new coil
These actions can be performed either through the main menu (
Coil
s
-
Editor
) or
with use of the inclusion menu.
D6x10-14
2
On
Auto
Fr
= 13890
Ort = 047
Ph = 244
Fig. 35
For proper operation of your detector, and to avoid unnecessary service, insure
that the profile selected matches exactly the coil installed.
39