23
In the majority of the situations a normal perception of signals can be attained by
setting this value to 2.
When the metal detector is in mode VDI the scale of screen is established
automatically such that hodographs always fit within the screen. At the lowest value of
1 small signals are amplified to maximum and large targets are slightly compressed. At
the maximum setting weak signals are reduced.
SEARCH MENU
Search
Pag1
SFT-filter:
On
Big-Filter:
3
Small -Filter:
2
Speed AGB:
1
Analog Mode:
Off
Ground Comp:
3
Fig. 23
Search
Pag2
Ident Thresh:
5
Coil Current:
2
Gain:
7
Audio Thresh:
8
Recovery Speed:
12
Fig. 24
In the menu SEARCH the following parameters are available:
SFT-FILTER [On/Off]
Enables or disables the SFT filter. Enabling the SFT filter
reduces the influence of ground mineralization on the detected targets signal thus
improving target ID in mineralized soils. This filter only works in VDI mode. When
VDI mode is off this filter has no affect.
25
