AJP PR5
User’s manual – 3
rd
Edition
– Rev 1
Page
33
- Clean motorcycle thoroughly and let it
dry after each riding.
- Treat engine, swing arm and all other
bare galvanized parts (except for brake
discs) with a wax-based anti-corrosion
agent.
STORAGE PROCEDURES
Should you desire to make a pause
over a long period of time (more than
one month), please observe the
following instructions:
- Clean the motorcycle thoroughly (see
CLEANING).
- Change engine oil.
- Remove spark plug and fill in approx.
5ccm of engine oil into the cylinder
through the opening. Actuate engine
start button in order to distribute the oil
into the cylinder walls and mount the
spark plug.
- Remove the fuel into an appropriate
container.
- Correct the tyre pressure.
- Lubricate pivot points of control levers,
foot rests, etc. as well as the chain.
- Lubricate shock absorber linkage.
- Disconnect battery (see BATTERY)
- Storage place should be dry and not
subject
to
excessive
temperature
fluctuations.
– Cover the motorcycle
with a blanket. Do not use air
impermeable materials as a possible
humidity might not be able to escape
and could cause corrosion.
! CAUTION !
Don’t let engine run for a short time
period (less than 5 minutes).
Engine would not get warmed
enough
and
developed
water
vapour would condensate when
cooling, causing valve and exhaust
corrosion
RE-INITIATION AFTER STORAGE:
- Mount the charged battery (check
polarity).
-
Fill up the tank with fresh fuel.
- Check motorcycle as before each start
(see DRIVING INSTRUCTIONS)
- Take a short, careful test ride first and
check all of your motorcycle systems.
Summary of Contents for PR5 250
Page 1: ......