AJP PR5 250, Owner'S Manual, Page: 15 / 38

AJP PR5
User’s manual – 3 rd
Edition
– Rev 1
Page
11
COOLANT LEVEL
Check frequently coolant level of
engine liquid cooling system.
Always perform coolant level control
with a cold engine.
To check coolant quantity, level the
motorcycle horizontally and vertically.
Take out the radiator cap (1), placed on
the left radiator and check if coolant
level is 5mm below the top (2).
If liquid level is below, fill with coolant
liquid until the mentioned level.
Quantity: 1 litre
Recommended liquid:
Agip - SPEZIAL PERMANET
– 40 O
C
Note: Antifreeze Coolant temperature
depends on the lower temperature that
motorcycle will operate. Choose an
anti-freezing coolant which resists to a
range of temperatures 5/10 ºC below
the minimum expected temperature in
Winter.
To check coolant level, never perform it
with a hot engine. Liquid in radiator is
under 1.1 bar of pressure and when the
cap is opened, liquid may spill off and
cause injuries and burns.
! WARNING !
Never perform coolant level check
when engine is hot.
Coolant liquid may spill off and
cause injuries and burns.
To drain cooling liquid untighten the
screw (1) and collect coolant liquid to
an appropriate vessel.
After draining, fill radiators with
recommended coolant liquid.
! WARNING !
Never run engine without coolant
liquid or low level. Engine may
overheat and damage.
Radiator fan
AJP PR5 has a fan placed on the right
radiator. It is actuated once coolant
liquid temperature reaches 95ºC and
1
2
1