10 GigE IP Mini-Converters SMPTE 2110 IP Transmit/Receive v2.2r1 56 www.aja.com
Firmware Screen
Figure 41. IPR-10G2-HDMI Firmware Screen
Menu
Status
Config
Presets
Network
Firmware
Alarms
None
IPR-10G2-TLK-ENG007
Firmware Page
Installed: 2.2.0.37d
Upload New Firmware:
Update Progress:
Use the following to perform a reboot of your IPR-10G2-HDMI: Reboot
Use the following to abort an update of your IPR-10G2-HDMI during the upload stage only: Abort Update
For latest firmware point your browser to: IPR-10G2-HDMI Support Page
Choose File
Bootloader Version: Unknown Version
Safeboot Image Version: 1.1.0.31d
Image Version in Flash: 2.2.0.37d
Currently Running Image Version: 2.2.0.37d
Bitfile Version: 2019/10/14 16:26:23
Bitfile Dev Info (this is not shown in release builds):
Design Name : cochrane10g2;COMPRESS=TRUE;UserID=0XFFFFFFFF;Version=2016.4
Date : 2019/10/14
Time : 16:26:23
Part Name : 7z030ffg676
Bus Width Pattern : Present
Sync Word : Present
Data Size (dec) : 3970928
Connection
Serial Number
ENG007
Software Version
2.2.0.37d
Connection Status
Connected
Network
CY-IPR-10G
CY-IPR10G2-HDMI
GC-IPT-10G2-SDI-E…
IPR-10G-HDMI-EN…
IPR-10G2-HDMI-EN…
IPR-10G2-TLK-EN…
JG-IPR-10G2-SDI
JG-IPT-10G2-SDI
WS-IPR-10G-1PR0…
WS-IPR-10G2-103
WS-IPR-10G2-HDMI
Downloading and Installing Updated Firmware
The Update Firmware screen allows you to download and install a firmware
update from AJA.
To Download and Install Updated Firmware
1. Visit the AJA website (aja.com) to locate and download the updated
software. The following page provides support information and will include
links to locations where you can download updates:
https://www.aja.com/family/ip-converters#support
2. After downloading the software update to your local drive, use the Browse
or Choose File button to locate the local software copy.
3. Follow the prompts to load the new firmware into your unit.
4. After the firmware has finished installing, reboot the unit by disconnecting
power for a few seconds, then reconnecting power.
NOTE: You can also update the firmware using eMini-Setup. See
Procedure" on page 28 for details.
Booting the 10 GigE IP Mini-Converters from the Safeboot
Firmware
The 10 GigE IP Mini-Converters contain primary firmware and safeboot
(secondary) firmware. To boot from the primary firmware, just cycle the unit's
power.