10 GigE IP Mini-Converters SMPTE 2110 IP Transmit/Receive v2.2r1 42 www.aja.com
Ember+
Enable or disable Ember+ network discovery for the device.
IPR-10G2-HDMI
The IPR-10G2-HDMI Config Screen, shown in three parts, has the parameters
required for the general operation of the IPR-10G2 units.
Figure 34. IPR-10G2-HDMI Config Screen 1 of 3
Menu
Status
Config
Presets
Network
Firmware
Alarms
None
IPR-10G2-TLK-ENG007
Config Page
System Name
IPR-10G2-TLK-ENG007
User Authentication
Disabled
Identify LED
Off
UPnP Host
Enable
IGMP Version
V3
System Mode
Advanced
Video Clock Mode
System Mode
Ref In
Packet Protection Mode
System Mode
Bypass
Frame Sync Mode
System Mode
Enable
Audio Rate Converter Mode
System Mode
Use Audio Src
Input Stream Selection
Manual
Connection
Serial Number
ENG007
Software Version
2.2.0.37d
Connection Status
Connected
Network
CY-IPR-10G
CY-IPR10G2-HDMI
GC-IPR-10G2-HDMI
GC-IPT-10G2-SDI-E…
IPR-10G-HDMI-EN…
IPR-10G2-HDMI-EN…
IPR-10G2-TLK-103
IPR-10G2-TLK-EN…
JG-IPR-10G2-SDI
JG-IPT-10G2-SDI
WS-IPR-10G-1PR0…
System Name
Defines a name for the system and gives it a unique identifier. This name is used
when displaying systems through the web interface.
User Authentication
Enable or disable user password authentication for the web interface.
Identify LED
Enables flashing of the Ethernet LEDs on the unit.
UPnP Host
Enable or disable network discovery using Universal Plug and Play.
IGMP Version
Select the Internet Group Management Protocol Version. AJA supports IGMP v2
and v3.
NOTE: It is important to know which version of IGMP is in use on your network.
Selecting the wrong IGMP version may cause long delays in processing multicast
subscriptions. See your network engineer for more information.
