10 GigE IP Mini-Converters SMPTE 2110 IP Transmit/Receive v2.2r1 49 www.aja.com
Figure 36. IPR-10G2-HDMI Config Screen 3 of 3
Menu
Status
Config
Presets
Network
Firmware
Alarms
None
IPR-10G2-TLK-ENG007
Audio Destination Address
Input Stream Selection
239.112.0.30
Audio Source Address
Input Stream Selection
- Ignore -
Video Signal Generator
Off
Video Test Pattern Format
1080p 29.97
Audio Signal Generator
Off
Audio Delay
0 Milliseconds
HDMI Audio Mode
Auto
Analog Audio Channels
Channels 1 & 2
NMOS Enable
Enable
Ember+ Enable
Disable
Enable/Disable Video
Enable
Enable/Disable Audio
Enable
Connection
Serial Number
ENG007
Software Version
2.2.0.37d
Connection Status
Connected
Network
CY-IPR-10G
CY-IPR10G2-HDMI
GC-IPR-10G2-HDMI
GC-IPT-10G2-SDI-E…
IPR-10G-HDMI-EN…
IPR-10G2-HDMI-EN…
IPR-10G2-TLK-103
IPR-10G2-TLK-EN…
JG-IPR-10G2-SDI
JG-IPT-10G2-SDI
WS-IPR-10G-1PR0…
Video Signal Generator
You can output a test video signal to validate video signal connections. Select Off
or Test Pattern.
Off -
No video signal is generated.
Other choices
• 100% Bars
• 75% Bars
• Ramp
• Multi Burst
• Line Sweep
• Check Field
• Flat Field
• Multi Pattern
• Black
• White
• Linear Ramp
• Slant Ramp
Test Pattern -
Color bars with a moving gray line are generated in the currently
selected video format and sent to the Video Output.
NOTE: The Test Pattern is supported only in 1080p and 1080i formats.
Video Test Pattern Format
Determines the video format output from the system's internal test signal
generator. Select from the following options:
• 525i 59.94