10 GigE IP Mini-Converters SMPTE 2110 IP Transmit/Receive v2.2r1 48 www.aja.com
• Audio 2 Destination Address
• Audio 2 Source Address
Manual -
When Manual is selected, you must enter configuration parameters
manually into the following Input Stream Selection fields:
• Video Input Format
• Audio Channels
• Audio Packet Interval — Select the time interval between packets
transmitted by the audio transmitter. The receivers support audio packet
intervals of 1 millisecond or 125 microseconds.
• Video Destination Address — The IP address corresponding to where
the video stream is being sent. In multicast mode, this is the multicast IP
address of the ST 2110 stream. In unicast mode, this is the unicast IP address
of the media port on the receiver. The Video Destination Address is almost
always required on a receiver (IPR-10G2-HDMI, IPR-10G-HDMI, IPR-10G2-SDI).
Additionally, the destination UDP port of the stream may also be specified
by appending it with a colon to the destination address.
• For example: 239.0.0.1:10000
• Video Source Address — The unicast IP address of the media port on the
sending device, such as an IPT-10G2-HDMI or IPT-10G2-SDI. This field should
be left blank in most situations. It is useful only in setups where multiple
transmitters are transmitting to the same multicast destination address and
IGMPv3 is in use to subscribe to the stream from a specific source.
• Audio Destination Address — This is the audio stream equivalent of the
Video Destination Address.
• Audio Source Address — This is the audio stream equivalent of the Video
Source Address.
• Video 2 Destination Address
• Video 2 Source Address
• Audio 2 Destination Address
• Audio 2 Source Address
NMOS/Ember -
When NMOS/Ember is selected, input stream selection occurs
through network discovery and communication with facility automation.
NMOS uses the address of the unit's internal web server for communications.
When the unit boots up, it actively scans the network for an NMOS registry
using MDNS/DNS. If it finds one, it tells the NMOS registry what it is and what
its capabilities are.
If the unit does not find an NMOS registry, it continues to announce itself
through MDNS so that it can be discovered. Once discovered, it registers itself
with whatever has discovered the unit through MDNS.
