Aiwa CSD-MD50, Service Manual, Page: 37 / 74

55
10) Press the MD
2
button to display “FOCUS ON!”.
11) Press the “ENTER” to display “ALL SV ON”, and press the “DISP” button to display “Er00**:0000”.
Check that the value of ### is “20” or less.
12) After the adjustment is completed, press the
9
button to display “ALL SV OFF”.
3-6. UTOC ERASE
Perform the following procedure only when the recorded disc needs to be erased.
1) Insert a disc from which UTOC is going to be erased.
2) Move the pick up to the center with
6
button and
5
button.
3) Press the “TAPE
1 2
” button to display “SELECT GRV”.
4) Press the “MD REC” button to display “REC Analog”.
5) Press MD
2
button to display “FOCUS ON!”.
6) Press the “ENTER” button to display “ALL SV ON”.
7) When the “CD
™
MD SYNCHRO RECORDING” button is pressed, “UTOC ERASE” appears on the display and UTOC is
erased.
8) After the erasure is completed, “ALL SV OFF” appears on the display.
SERVICE JIG AND TOOLS
The following jigs and tools can be used.
CD Block
MD Block
Usage
CD mechanism stand
P.U. extension FFC
S.T.I G-98-50
S.T.I G-98-50
Part No.
SV-J00-018-010
87-CE1-640-010
SV-J00-043-010
SV-J00-043-010
Part Name
JIG, P-CD BY TORIKOSHI
FF-CABLE, 16P 1.0 250mm
FFC, 8P-1.0
FFC, 14P-1.0