Use and maintenance manual
Rev: 0
Page 19 of 24
Date: 30.04.2019
10.4 Warranty duration and limits
A product remains in warranty for one year from date of purchase. In any case, the warranty period
shall not exceed two years from product manufacture date, unless the end customer submits proof
of purchase date.
The warranty does not apply to the following cases:
- an external cause (mechanical shock, lightening, sudden changes in voltage)
- damage incurred during transport or storing
- a product installed in a manner that does not comply with manufacturer specifications
- a product containing too much dust in inner parts
- a product exposed to rain or humidity
- a product which has been modified by the client
- deteriorations caused by ill use of equipment
- use of unsuitable accessories or consumables
- natural wear of different parts of equipment
- freezing caused by insufficient or unsuitable use of the coolant
The guarantee does not apply to normal wear of accessories or consumables (ferrite).
If the equipment is modified or repaired by unauthorised personnel, the warranty shall be void.
CAUTION
:
The inductor (Fig. 4) must not be bent or altered in shape in any way. If the
inductor is modified, the warranty shall be automatically rendered void.
11 Replacing the inductor
Inductor replacement should be performed only by authorised personnel and only
after cutting off power to the machine.
Wear protective gloves during maintenance and/or repairs.
Electrically isolate the machine by disconnecting it from the mains.
When replacing the inductor, verify that there are no significant liquid leaks from
the manipulator. If there are any significant leaks, top up liquid in the corresponding
tank.
Tightening should not exceed 5Nm when fastening the inductor.
Tighten using a suitable torque wrench.
